Manualshelf

HP FlexFabric Virtual Switch 5900v Troubleshooting Guide

ManualsBrandsHP ManualsNetwork HardwareVirtual Ethernet Switches
12345678910
6
The output shows that XGE1/0/15 and XGE1/0/29 connect to vmnic2 and vmnic3, respectively.
A port in S state indicates the port is a selected port. Make sure all ports connecting to the server
are selected.
Contacting HP Support
If you cannot solve a problem after using the troubleshooting suggestions in this guide, contact HP
Support for help. For more information, see "Contacting HP Support."