Owner manual

102 HP VMA SAN Gateway User’s Guide AM456-9026A
Examples
The following examples demonstrates using the
igroup create command to manage initiator
groups and initiators.
The following command creates an initiator group named FINANCE:
The Cisco-style
no prefix may be used to delete initiator groups or initiators. In the following
example, the command deletes the igroup FINANCE.
igroup addto Command
The
igroup addto command adds one or more initiators to a group.
Syntax
[no] igroup addto <igroup_name> initiators [initiator_name …]
The following command adds three initiators to the initiator group named FINANCE:
The following command removes the initiator wwn.20:20:20:20:20:20:20:20 from igroup
FINANCE and preserves the other two initiators (wwn.20:20:20:20:20:20:20:21
wwn.20:20:20:20:20:20:20:22).
Creating LUNs
The fourth step in configuring the vSHARE system is to create the LUNs. In vSHARE, LUNs are
addressable subsets of the flash memory within the container that comprises a HP VMA-series
Memory Array. In many systems, a LUN may be referred to as a
volume or logical unit.
igroup create name FINANCE
no igroup create name FINANCE
igroup_name
The name is alphanumeric only.
initiator_name
The initiator_name must be prefixed with “wwn.” (FC
initiators).
igroup addto FINANCE initiators wwn.20:20:20:20:20:20:20:20
wwn.20:20:20:20:20:20:20:21 wwn.20:20:20:20:20:20:20:22
no igroup addto FINANCE initiators wwn.20:20:20:20:20:20:20:20