Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 105
Syntax
[no] lun set container <id> name <name> readonly
show luns Command
The
show luns command allows you to view various types of information about a LUN or LUNs.
Syntax
show luns [container] [name] [count] [reserved] [serial] [sessions]
Syntax Description
show containers Command
The
show containers command displays all available containers.
Syntax
show containers
Resizing LUNs
lun resize container <container_id> name <lun_name> size <new_GB>
Increases the size of an existing LUN by specifying the new size in gigabytes.
lun resize container <container_id> name <lun_name> size +<increment_GB>
Increase the size of an existing LUN by specifying the amount (GBs) to increase the current size.
Decreasing the size of an existing LUN is not supported. For a smaller size LUN, create a new LUN
of the desired size.
WARNING! Existing client side file systems that might be stored on the LUN are not extended as part of the
resize operation. Increasing the size of an existing client side file system must be done on the client. Some
client systems do not detect a LUN size change until they reboot.
container Displays only the LUNs within a specific container.
name Displays a specific LUN.
count Displays LUNs with active sessions and their count.
reserved Displays LUNs with SCSI reservations.
serial Displays the serial numbers for each LUN.
sessions Displays the sessions accessing a particular LUN.