Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 135
Show Configuration Files
To view a list of all of the configuration files associated with this VMA SAN Gateway, use the
show configuration files command.
The command identifies the active file, the back up of the current active file (called
<filename>.bak), and backups of previously active configuration files.
In the following example, the
show configuration files command returns five configuration
files:
After switching from the original configuration file (named initial) to a file named cf1, and
saving that file to another file named
cf2 using the no-switch option, the CLI displays each of
these five configuration files.
To view the configuration files from the HP VMA Web Interface, see Managing Configuration Files
on page 132.
Show Configuration
The show configuration commands enable you to view the commands required to bring a fresh
system up to match a given configuration.
•
show configuration
• show configuration running
• show configuration files
• show configuration files <filename>
• show configuration full
• show configuration running full
• show configuration unsaved
The output of each of these commands begins with a short header that contains the name and version
number of the configuration in a comment.
gateway02 [cluster1: master] (config) # show configuration files
initial
initial.bak
cf1 (active)
cf1.bak
cf2
gateway02 [cluster1: master] (config) # █