Owner manual

136 HP VMA SAN Gateway User’s Guide AM456-9026A
With the exception of the show configuration full and show configuration running
full
commands, output omits commands that are not required because they set parameters to their
default values.
show configuration
The
show configuration command displays commands to reproduce the state saved in the
active configuration file.
show configuration running
The
show configuration running command displays commands to reproduce the state of the
current running configuration, which could include some unsaved configuration settings. The show
running-config and the write terminal commands are the same as
show
configuration running
command.
show configuration files
The show configuration files command displays a list of all of the configuration files
associated with this VMA SAN Gateway.
show configuration files <filename>
The show configuration files <filename> command displays commands to reproduce
the state saved in the specified configuration file.
show configuration full
The
show configuration full command displays all commands, including any default
settings, to reproduce the state saved in the active configuration file.
show configuration running full
The
show configuration running full command displays all commands, including any
default settings, to reproduce the state of the current running configuration.
show configuration unsaved
The
show configuration unsaved command displays commands that have been configured,
but not yet saved in the configuration file.
User passwords cannot be recovered with a
show configuration command (or similar
command) unless the passwords are encrypted. For more information, see the command
username
<userid> password
in User Accounts and Local Authentication on page 158.