Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 137
Reverting to Saved Configuration Files
If you do not want to keep the current changes, you can revert to the last saved configuration or
apply an inactive configuration file to the VMA SAN Gateway using the
configuration
revert saved
command.
In the following example, the command undoes recent changes and returns to the configuration
saved in the active configuration file:
In the HP VMA Web Interface, you can select and apply any available configuration file in the
Administration > Cluster Admin > Reboot Cluster Administration page. For more information,
see Managing Configuration Files on page 132.
Delete, Move, or Copy a Configuration File
To delete, move (rename), or copy an inactive configuration file, use the following CLI commands:
•
configuration delete <filename>
•
configuration move <source name> <destination name>
•
configuration copy <source name> <destination name>
An active configuration file may not be deleted or renamed, nor may it be the target of a move or
copy. It may be the source of a copy, in which case the original remains active.
For information on how to delete a configuration file from HP VMA Web Interface, see Managing
Configuration Files on page 132.
Managing Users
User management privileges are set by assigning one of the following roles to a user account:
• admin: The administrator role has full administration privileges to view anything, take any
action, or change any configuration. This role can access every page in the HP VMA Web
Interface. The only tasks this role cannot perform are those assigned to the crypto role.
• monitor: The monitor role can read all data and perform some actions, such as rebooting the
system and configuring various system parameters, but cannot change the configuration of the
VMA SAN Gateway. This role can view some of the pages in the HP VMA Web Interface.
Caution: Initially these accounts have no password. Setting a password for the admin role is highly
recommended.
gateway02 [cluster1: master] (config) # configuration revert saved
gateway02 [cluster1: master] (config) # █