Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 161
Display Current Date, Time, and Timezone
show clock
Display the current system time, date, and timezone.
Use the NTP Server to Set the System Clock
ntpdate <IP address>
Set the system clock using the specified NTP server. This is a one-time operation and does not cause
the clock to be kept in sync on an ongoing basis. It will generate an error if NTP is enabled, as the
socket it requires will already be in use.
Add or Remove an NTP Peer
ntp peer <IP address> [version <number>]
no ntp peer <IP address>
Add or remove an NTP peer. Allowable version numbers are 3 and 4. If no version number is
specified when adding a peer, the default is 4.
Add or Remove an NTP Server
ntp server <IP address> [version <number>]
no ntp server <IP address>
Add or remove an NTP server. Allowable version numbers are 3 and 4. If no version number is
specified when adding a server, the default is 4.
Disable an NTP Server or Peer
[no] ntp peer <IP address> disable
[no] ntp server <IP address> disable
Disable or re-enable an NTP server or peer. Servers and peers start enabled; disabling is just a way
of making them temporarily inactive without losing their configuration.
Enable or Disable NTP
[no] ntp enable
[no] ntp disable