Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 191
Control the length of time before web session cookies are automatically regenerated.
Control Web Session Timeout
web session timeout <length in minutes>
no web session timeout
Control the maximum lifetime of a web session cookie.
Display Web Interface Details
show web
Display Web Interface configuration settings.
Address Resolution Protocol Commands
The following commands allow you to configure ARP, a protocol used for resolution of network
layer addresses into link layer addresses. This is a critical function in multiple-access networks.
Add and Remove Static ARP Entries
arp <IP address> <MAC address>
Add a static entry to ARP.
no arp <IP address>
Remove a static entry from ARP. Note that this cannot be used to remove dynamic entries.
Clear Dynamic ARP Entries
clear arp-cache
Clear dynamic entries in the ARP cache. Note that this does not delete static ARP entries configured
with the
arp ... command.
Display Contents of ARP
show arp
Display the contents of ARP. This should contain all of the statically-configured ARP entries, as
well as any that the system has picked up at dynamically.