Owner manual

200 HP VMA SAN Gateway User’s Guide AM456-9026A
Set the SNMP Community Name
snmp-server community <community name>
no snmp-server community
Set the community name required to be supplied with SNMP requests to the system.
Set the Contact and Location Variables
snmp-server contact <contact name>
no snmp-server contact
snmp-server location <system location>
no snmp-server location
Set the syscontact and syslocation variable served from the System MIB in MIB-II.
Add or Remove a Host From Traps Notification
snmp-server host <hostname> traps [version <1,2c>] <community string>
no snmp-server host <hostname>
Add or remove a host to which SNMP traps should be sent. Note that this setting is only meaningful
if traps are enabled, though the list of hosts may still be edited if traps are disabled.
Disable a Trap Sink
[no] snmp-server host <hostname> disable
Disable a trap sink without actually removing it altogether from the configuration. All trap sinks are
created enabled.
Specify the Events Sent to SNMP Traps
[no] snmp-server traps event <event name>
Specify which types of events should be sent as SNMP traps. By default the entire list of notifiable
events are sent as SNMP traps to any declared trap sinks. This command enables or disables a single
event for conversion to an SNMP trap.
Display SNMP Configuration Details
show snmp
Display all SNMP configuration options.