Owner manual

202 HP VMA SAN Gateway User’s Guide AM456-9026A
An hour and minute must be specified; optionally, seconds and/or a date may be specified. The date
must be in either
yyyy/mm/dd or yyyy-mm-dd format. The date if not specified defaults to the
epoch (
1/1/70).
Clear Scheduled Date and Time
no job <job_id> date-time
Clears the scheduled date-time for the job.
Enable the Job State
job <job_id> enable
Set the job state to enable. If the specified time is in the future, schedule the job for execution and
place the job in the “pending” state.
Cancel a Job
no job <job_id> enable
Cancel any potential execution of the job. Place the job in an inactive state.
Execute a Job
job <job_id> execute
Force an immediate execution of the job. The timer (if set) is not canceled and the job state is not
changed. The job will not be run if not currently enabled.
Name the Job
job <job_id> name <friendly_name>
no job <job_id> name
Specify a name for the job. The no command deletes the name.
Execute the Job In Spite of Errors
job <id> fail-continue
no job <id> fail-continue