Owner manual

204 HP VMA SAN Gateway User’s Guide AM456-9026A
The command returns the node, hostname, target port, status (enabled or not), and address (WWN).
The
detail parameter returns the network bindings for each target.
Initiator Group Commands
This section provides the syntax for initiator group commands, along with an explanation of the
functionality of each command.
Create an Initiator Group
[no] igroup create name <name>
The igroup create command creates an initiator group, after which you can add initiators using
the
addto command. For more information, see Add Initiators to a Group on page 204.
Add Initiators to a Group
[no] igroup addto <igroup name> initiators [initiator_name …]
The igroup addto command adds one or more Fibre Channel initiators. Fibre Channel initiator
identifiers (WWNs) are generated automatically by a Host Bus Adapter (HBA).
LUN Commands
This section provides the syntax for LUN commands, along with an explanation of the functionality
of each command.
View LUNs
show luns container name sessions
> enable
# show targets
Node Hostname Proto Target Enab Address
----------------------------------------------------------------------
--------
1 lab-n1 fc hba-a1 yes wwn.21:00:00:1b:32:9b:83:3b
1 lab-n1 fc hba-a2 yes wwn.21:01:00:1b:32:bb:83:3b
n1:targ2
2 lab-n2 fc hba-a1 yes wwn.21:00:00:1b:32:9f:f3:ce
2 lab-n2 fc hba-a2 yes wwn.21:01:00:1b:32:bf:f3:ce