Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 235
Default Enabled Traps
New Traps in HP VMA SAN Gateway Release G5.5.1
Traps Description
lid-ajar Lid ajar alarm
vmg-boot-raid-change HP VMA SAN Gateway only. Boot disk status
changed.
vmg-fan-change HP VMA SAN Gateway only. Fan state
changed.
vmg-psu-change HP VMA SAN Gateway only. Power supply
status changed.
New Traps in HP VMA SAN Gateway Release G5.1.x
Traps Description
array-data-plane-ready: Array data plane state changed.
array-led-change: Array LED state changed.
array-pcie-link-down: Array PCIE link down.
array-pcie-link-up: Array PCIE link up.
array-psu-state: Array PSU state changed.
array-raid-rebuild: Array RAID rebuild state changed.
chassis-temperature-high: High chassis temperature detected.
chassis-temperature-ok: Chassis temperature returned to normal levels.
lid-ajar-time-high: Excessive lid ajar time detected.
lid-ajar-time-ok: Lid ajar alarm cleared.
vimm-state-change: Array VIMM state changed.
vimm-temperature-high: High VIMM temperature detected.
vimm-temperature-ok: VIMM temperature returned to normal levels.
Traps Prior to HP VMA SAN Gateway Release G5.1.x
Traps Description
cpu-util-high: CPU utilization has risen too high.
disk-space-low: File system free space has fallen too low.
interface-down: An interface's link state has changed to down.
interface-up: An interface's link state has changed to up.
liveness-failure: A process in the system was detected as hung.
paging-high: Paging activity has risen too high.
process-crash: A process in the system has crashed.