Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 53
Note: Each address must be on its own line.
7. Click Save. The newly added initiators appear in the Manage Initiators panel and are
associated with the selected (highlighted) initiator group.
Note: Initiator hosts added in the Advanced panel appear in the group even if the host has not yet
been added to the network. Check with your network administrator for status on the availability of
these hosts.
Manage Targets
In a cluster, each SAN Gateway operates as a SAN (Fibre Channel) target that provides access to
the LUNs stored on its attached memory arrays. Fibre Channel target ports are supported. Every
target is a specific port on a hardware Fibre Channel host bus adapter (HBA).