Owner manual

AM456-9026A HP VMA SAN Gateway User’s Guide 71
Note: If one or more IP addresses for DNS servers were set up as part of the initial out-of-the-box
setup, they are listed on this page.
To view configured DNS settings, do the following:
1. Select Administration > Network > DNS Settings.
2. Go to the DNS Servers panel at the top of the window to view information on the DNS servers
that were configured as part of the initial out-of-the-box setup.
To add and modify name servers, do the following:
1. Select Administration > Network > DNS Settings.
2. To modify a configured name server, go to the Add or Modify Name Servers panel and change
the Primary DNS IP address displayed in the text box.
3. To add a second name server, enter an IP address in the Secondary DNS IP address text box.
4. To add a third name server, enter an IP address in the Terciary DNS IP address text box.
5. Click Apply.
To add and remove domain names, do the following:
1. Select Administration > Network > DNS Settings.
2. To remove an existing domain name, go to the Domain Names panel and select the domain
name from the list. The selected name highlights.