Owner manual

80 HP VMA SAN Gateway User’s Guide AM456-9026A
Enabling Email Alerts
You can specify whether or not to receive alerts from the vSHARE cluster. Call Home Settings
entries are used to send the alerts. For information on how to enable Call Home settings, see
Specifying Call Home Settings on page 76.
To enable email alerts, do the following:
1. Complete the task as described in To enable auto support and fault reporting, do the following:
on page 76.
2. Select Administration > Notification > Email Settings.
3. In the top section of the Email Settings page, select the Enable Email Alerts check box.
4. Click Apply to accept, or Cancel to deactivate the setting.
5. Go on to complete Configuring SMTP Authentication on page 81.
Configuring the Email Server
You can configure the email server that handles event notifications in the
Note: Go to Managing E-mail Notifications on page 83 for information on how to specify the types
of events for which you want to be notified.
To configure the email server for notifications, do the following:
1. Select Administration > Notification > Email Settings.
2. In the Email Configuration panel, specify the following information:
• Mail Hub:
Enter the mail hub fully qualified domain name (FQDN), such as
callhome.example.com.
• Mail Hub Port: Enter the port number for the mail hub.
• Mail Return Address: Enter an email return address. Use do-not-reply, if you do not want to
receive responses to alert notifications.
• Mail Return Domain Name: Enter a domain name for return mail, or leave blank to use the
system domain name.