Owner manual

88 HP VMA SAN Gateway User’s Guide AM456-9026A
Select None: Deselects all events
Reset Defaults: Returns to system default selections
• Select individual events in a category by clicking the check box next to the name. A check mark
appears when the event is selected. Select the event again to deselect the event and remove the
check mark.
• Select all the events in a category by clicking the check mark icon on the right side of the header.
• Deselect all selected events in a category by clicking the X icon on the right side of the header.
• Reset the selections for a category to the default selections by clicking the star icon on the right side
of the header.
3. Click Apply to accept your selections, or Cancel to return to the previous settings.
Tools
• Feature Licenses
• Upgrade
• Diagnostics
Adding and Removing Feature Licenses
The Administration > Feature Licenses page allows you to add or remove feature licenses. A list
of currently installed licenses appears at the top of the window.
Adding a New Feature License
Adding a new feature requires a license key. You must obtain from your HP VMA Memory
Customer Support representative before you begin the following procedure.
To add a new feature license, do the following:
1. Select Administration > Notification > Feature Licenses.
2. In the Add New Licenses panel, enter the license key for the new features in the text box.
Note: If you are adding more than one license, enter each key on a new line.