HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

ManualsBrandsHP ManualsSoftwareVMware Virtualcenter Management Server License Software

Version 2.1.1 17

Figure 4 represents a possible implementation of the HP Management Processor Lite profile. In this

example, the system has 2 Management Processors – MP1 is enabled (active) and MP2 is disabled

(inactive). MP1 and MP2 belong to the collection MPCollection1 and because both MP1 and MP2 are

reporting statuses of ‘OK’ and their respective HP_MemberOfCollection.Included properties have values

of TRUE, the overall group operational status is also OK. Because MPCollection1 is instantiated, the

GroupOperationalStatus is participating in overall system status. FW1 and FW2 are the HP_MPFirmware

instantiations representing the MP1 and MP2 firmware respectively.

For simplicity, not all properties are shown.

Profile2:HP_RegisteredProfile

RegisteredOrg: Other

OtherRegOrg: HP WBEM TC

RegisteredName: HP Base Server

Profile3:CIM_RegisteredProfile

RegisteredOrg: DMTF

RegisteredName: Base Server

Profile1:HP_RegisteredProfile

RegisteredOrg: Other

OtherRegOrg: HP WBEM TC

RegisteredName: HP MP Lite

FW1:HP_MPFirmware

MPCollection1:HP_MPCollection

GroupOperationalStatus[0]: OK

MP2:HP_ManagementProcessor

ControllerType: Embedded iLO

EnabledState: Disabled

OperationalStatus[0]: OK

MP1:HP_ManagementProcessor

ControllerType: PCI Board, RILOE II

EnabledState: Enabled

NICCondition: OK

OperationalStatus[0]: OK

OperationalStatus[1]: OK

System1:HP_ComputerSystem

HP_MPComponentCS

HP_MPMemberOfCollection

Included: TRUE

HP_MPMemberOfCollection

Included: TRUE

HP_MPHostedCollection

FW2:HP_MPFirmware

HP_MPElementFirmwareIdentity

CIM_ElementConformsToProfile

HP_ExtendsProfile

HP_ReferencedProfile

HP_MPInstalledFirmwareIdentity

Figure 4 – Management Processor Lite Profile: Example Object Diagram

Figure 5 represents a possible implementation of the HP Management Processor Lite profile. In this

example, the system has 1 Management Processor – MP1. MP1 belongs to the collection MPCollection1.

Because MPCollection1 is instantiated and HP_MemberOfCollection.Included property has a value of

TRUE, the GroupOperationalStatus is participating in overall system status. The on-board network

interface is in use in this example and is reporting that it is currently disconnected from the network.

However, in this example the provider does not wish for the NIC status to participate in overall MP status

(and as a result, overall system status) and therefore has not populated the

HP_ManagementProcessor.OperationalStatus[1] property. The overall resulting MP status reported in

HP_ManagementProcessor.OperationalStatus[0] is therefore OK and this status is forwarded to

participate in overall system status via the HP_MPCollection.GroupOperationalStatus[0] property.