HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 1.0.1 13
7.1.2 HP_ StorageEnclosureProcessor.Dedicated
This property shall be set to a value of 2 to indicate “Other”. See section 7.1.3 for more details
7.1.3 HP_ StorageEnclosureProcessor.OtherDedicatedDescriptions
This property is used to define how the computer system class is being used. In this case the
value shall be set to “SDE” to represent Storage Device Enclosure.
7.2 HP_StorageEnclosure (Mandatory)
There shall be one HP_StorageEnclosure instance associated to HP_StorageEnclosureProcessor by
association CIM_SystemPackaging to represent the physical enclosure chassis.
7.2.1 HP_StorageEnclosure.Location
Table 3 – HP_StorageEnclosure.Location values
This property shall be used to determine the physical location of the attached enclosure with respect to
the scoping class instance. This property shall be set to one of the values listed in Table 3.
7.2.2 HP_StorageEnclosure.Model
This property should contain the model name for the enclosure.
7.2.3 HP_StorageEnclosure.SerialNumber
This property should contain the serial number for the enclosure.
7.2.4 HP_StorageEnclosure.PartNumber
This property should contain the part number for the enclosure, if known. If the part number is unknown
then it should contain “N/A”.
7.2.5 HP_StorageEnclosure.Manufacturer
This property should contain the manufacturer name for the enclosure.
7.3 HP_DriveCage
There shall be one instance for each Drive Cage contained within the enclosure associated by
CIM_Container to HP_StorageEnclosure.
7.3.1 HP_DriveCage.DriveBays
This property shall indicate the total number of drive bays (hot plug drives) supported by this instance of
the Drive Cage.
Location
Description
Unknown (0)
Undetermined
Internal (1)
Contained within the system package associated to the Scoping class instance.
External (2)
Located external to the system package associated to the Scoping class instance.