HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 1.0.1 15
9 Use Cases
9.1 Object Diagrams
HPSA_StorageEnclosureProcessor:SE1
HPSA_StorageEnclosure:SE1
Location=”1" (External)
Container
HPSA_DriveCage:SE1:DC0
HPSA_ArraySystem:abcd
OperationalStatus[]=”2"
SystemComponent
SystemPackaging
HPSA_StorageEnclosureLocation:
SE1
ElemInfoTagDesc = Box
ElemInfoTag = “1”
PhysicalElementLocation
HPSA_DriveCageLocation:SE1:DC0
Port = “1E”
PhysicalElementLocation
HPSA_DiskPhysicalPackage:abcd:D0
Container
HPSA_DiskDriveLocation:abcd:D0
ElemInfoTagDesc = Bay
ElemInfoTag = “5”
PhysicalElementLocation
HPSA_DiskDrive:abcd:D0
OperationalStatus[]=”2" (OK)
Realizes
Disk Drive Lite Subprofile
HPSA_PhysicalPackage:
abcd
SystemPackaging
HPSA_ArraySystemLocation:
abcd
ElemInfoTagDesc = PCI Slot
ElemInfoTag = “3”
PhysicalElementLocation
HHRCExternal Storage Enclosure
HPSA_EnclosureFirmware:SE1
ElementSoftwareIdentity
Figure 3 – HP Storage Enclosure Profile: HHRC controller with External enclosure
Figure 3 shows an instance of Host Hardware RAID Controller (HHRC) HBA installed in PCI Slot 3 of the
Host system. The Storage Enclosure is attached via cable (e.g. SCSI, SAS) to an external port on the
HBA. The central class instance (HPSA_StorageEnclosureProcessor) is associated to the Scoping Class
instance of HHRC (HPSA_ArraySystem) via a SystemComponent association.
The physical chassis (HPSA_StorageEnclosure) is associated to the central class instance via
CIM_SystemPackaging association. Once the chassis instance has been discovered, then Drive Cages
instances can be found using CIM_Container association.
Disk Drive physical package (as defined in Disk Drive Lite sub-profile (SNIA)) is associated to the drive
cage via the association CIM_Container
Location of a given physical package can be determined by traversing the association
CIM_PhysicalElementLocation to an instance of HP_Location. By using the tags defined in this profile,
and walking the containment shown above, the location can be determined.
In the case of Figure 4, the location of the disk drive could be generated as follows. Starting with the
instance of HPSA_DiskDrive:abcd:D0 (HP_DiskDrive)