HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 2.0.0 33
7 Implementation Requirements
This section details the requirements for the HP extensions of this profile. All requirements for the
related profiles defined in Table 1 in Section 5 apply.
7.1 HPSA_ArrayController
There shall be an instance of HPSA_ArrayController for each array controller present. These instances
should be associated to the Top Level System (HPSA_ArraySystem) class by an instance of
CIM_ComponentCS association. Note that some external storage subsystems may have multiple
controllers configured in a redundant configuration. The HPSA_ArrayController class has been extended
from CIM_ComputerSystem as defined in SNIA Multiple Computer Systems profile.
HPSA_ArrayController.OperationalStatus
OperationalStatus[0] will be used to indicates the overall health of the controller. Values for
index [0] will be calculated as follows.
Table 3 - HP Smart Array profile: HPSA_ArrayController.OperationalStatus[0]
OperationalStatus[0] Reason for Status
Error
If the controller status is ERROR or
If the Cache Status is Permanently Disabled or
If the Battery is failed
Degraded
If none Failed conditions are met and
If the Cache Status is Temporarily Disabled or
If the Battery is not fully charged or
If the Capacitor charge is low or
If the capacitor is not attached or
If the capacitor-based cache module backup
operation failed or
If the capacitor-based cache module restore
operation failed or
If the capacitor-based cache module hardware failed
or
If the Capacitor failed to charge or
If the cache is not configured
OK
If none of the Failed and none of the Degraded
conditions are met
HPSA_ArrayController.ADGSupported
Value indicates whether this controller supports Advanced Data Guard Raid level.
Table 4 - HP Smart Array profile: HPSA_ArrayController.ADGSupported
Value ValueMap
0
Unknown
1
Yes
2
No
3
N/A