HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 2.0.0 39
Value ValueMap
0
Unknown
1
SAS/SATA serial
8
Narrow
16
Wide
7.3.6 HPSA_DiskDrive.Identify(uint32 Duration)
This method will cause the hard drive to set some indicator (e.g. set or blink drive LEDs) for the given
duration (default duration is 30 seconds). After the duration has expired the drive indicator will return to
normal use.
Return values for Identify() method shall be the same as specified in Table 12 where the method
execution behavior matches the return code description.
Identify() parameters shall be the same as those specified in Table 13.
7.3.7 HPSA_DiskDrive.DriveConfiguration
Indicates the how the drive has been configured by the controller. Supported values are:
Table 20 - HP Smart Array profile: HPSA_DiskDrive.DriveConfiguration
Value
ValueMap
0
Unknown
1
Unconfigured
2
Data
3
Spare
4
Non RAID
7.3.8 HPSA_ DiskDrive.DriveRotationalSpeed
Value indicates the rotational speed of the drive in revolutions per minute.
7.3.9 HPSA_DiskDrive.DriveHasMNPData
Boolean value indicates that the drive supports reporting of Monitoring and Performance data counters.
7.3.10 HPSA_DiskDrive.DrivePlacement
Value indicates where the drive is located with respect to the controller.
Table 21 - HP Smart Array profile: HPSA_DiskDrive.DrivePlacement
Value ValueMap
0
Unknown
1
Internal
2
External
7.3.11 HPSA_DiskDrive.ControllerLocation
This value indicates the location of the controller with which the disk drive is attached to.