HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 2.1.0 23
Table 7 - HP SAS HBA profile: HPSAS_StorageVolume.FaultTolerance
Value ValueMap
0
Unknown
1
RAID 0
2
RAID 1
3
RAID 1+0
4
RAID 4
5
RAID 5
6
RAID 51
7
RAID 6
7.2.3 HPSAS_StorageVolume.OSName
This should display the volume name as it is known to the operating system if known otherwise it shall
either show “Unknown” or not be assigned a value.
7.3 HPSAS_StorageExtent
The HPSAS_StorageExtent class has been extended from CIM_StorageExtent class as defined in SNIA
Block Services profile.
7.3.1 HPSAS_StorageExtent.OSName
For drives that have not been configured as part of a raid set, this should display the volume name as it is
known to the operating system, otherwise it shall not be assigned a value.
8 Methods
None.
8.1 Profile Conventions for Operations
Support for operations for each profile class (including associations) is specified in the following sub-
clauses. Each sub-clause includes either a statement “All operations are supported as described by
DSP200 v1.2” or a table listing all the operations that are Unspecified by this profile or where the profile
requires behavior other that described by DSP200.
The default list of operations is as follows:
• GetInstance
• Associators
• AssociatorNames
• References
• ReferenceNames
• EnumerateInstances
• EnumerateInstanceNames
A compliant implementation shall support all the operations in the default list for each class, unless the
Requirements column states something other than Mandatory.
9 Use Cases