HP vp6300 Series Digital Projector User’s Guide
© Copyright 2005 Hewlett-Packard Development Company, L.P. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Hewlett-Packard Company Digital Projection and Imaging 1000 NE Circle Blvd.
Contents 1 Setting Up Safety precautions . . . . . . . . . . . . . . What’s in the box? . . . . . . . . . . . . . . Identifying common features. . . . . . . . Projector at a glance . . . . . . . . . . Projector buttons and lights . . . . . . Back panel . . . . . . . . . . . . . . . . . Remote control . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . Setting up the projector . . . . . . . . . . . Positioning the projector . . . . . . . . Connecting power . . . . . . . . . . . .
Adjusting the projector setup . . . . . . . . . . . . Preventing unauthorized use . . . . . . . . . . . . Using the on-screen menu . . . . . . . . . . . . . . . . Changing settings using the on-screen menu . Input menu . . . . . . . . . . . . . . . . . . . . . . . . Picture menu . . . . . . . . . . . . . . . . . . . . . . . Sound menu . . . . . . . . . . . . . . . . . . . . . . . Setup menu. . . . . . . . . . . . . . . . . . . . . . . . Help menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 Reference Specifications. . . . . . . Safety information. . . . LED safety . . . . . . . Mercury safety . . . Regulatory information U.S.A. . . . . . . . . . Canada . . . . . . . . Japan . . . . . . . . . . Korea. . . . . . . . . . International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Setting Up Safety precautions WARNING! Read and observe these precautions and all others in this manual to reduce the risk of injury and equipment damage. • Do not look directly into the lens when the lamp is on. • Do not expose the projector to rain or moisture, and do not use it near water. • Keep paper, plastic, and combustible material at least 0.5 m (2 ft) away from the projector lens and exhaust vents. • Do not allow liquid, food, or small objects to get inside the projector.
What’s in the box? Before setting up your projector, be sure your shipping box includes the following items. If the shipping box does not contain any of the following items, contact HP. TIP: After you open the box and remove the contents, save the box in case you must ship the projector. Identifying the contents of the box 8 Item Function 1 Projector Displays images. 2 VGA cable Connects computer video output to the projector. 3 Power cord Connects projector to power source.
Identifying the contents of the box (continued) Item Function 5 Literature package Contains documentation for the setup and use of the projector, plus support and warranty information. 6 Quick Setup Guide Provides instructions to help get started. Identifying common features Projector at a glance Identifying major components Item Function 1 Infrared port Receives signals from the remote control. Also works as a button to adjust the height.
Identifying major components (continued) 3 Item Function Foucus and zoom rings Focus ring: focuses at distance of 1 to 10 m (3 to 33 ft). Zoom ring: enlarges picture size from 100% to 116%. 10 4 Button panel Contains control buttons and indicator lights. 5 Lens cover Protects the lens. 6 Lens Projects the image.
Projector buttons and lights Identifying the projector buttons and lights Item Function 1 Power button Turns the projector on or off. 2 Keystone adjustment Adjusts picture to eliminate slanted sides. 3 Page-up and Page-down buttons Scroll up and down through pages on a connected computer. 4 Source button Displays picture from the next input port. 5 Picture mode button Selects the next picture and color combination— can be customized.
Back panel 12 Identifying back panel components Item Function 1 S-video input port Connects S-video source. 2 Composite-video input port Connects composite-video source. 3 Audio-in ports Connect stereo audio source using either RCA plugs or stereo mini-phone plug. 4 USB port Connects to computer and controls the mouse. 5 VGA-in port Connects video input from computer or component-video source. 6 VGA-out port Sends the VGA-in signal to a monitor.
Identifying back panel components (continued) 8 Item Function 12-Vdc trigger output Controls a motorized screen or similar accessory device. NOTE: Available only on certain models. 9 Power cord socket Connects power cord to projector. : DVI input port Connects DVI-D digital video source. NOTE: Available only on certain models. ; Lock slot < Serial port Locks the projector to a stationary object with the use of a cable and lock. Connects a room controller.
Remote control TIP: Before using the remote control, remove the battery protector by pulling the plastic tab until it comes out of the remote control. Identifying components of the remote control 14 Item Function 1 Hide button Blanks picture, mutes speaker. 2 Mouse pad Moves the mouse pointer on a connected computer. 3 Power button Turns the projector on or off. 4 Left-click and right-click mouse buttons Perform left-click and right-click mouse functions on a connected computer.
Identifying components of the remote control (continued) Item Function 6 Auto sync button Resynchronizes the projector to the input signal from a computer. 7 Picture mode button Selects the next picture and color combination— can be customized. 8 Menu buttons Change settings using the on-screen menu. 9 Source button Displays picture from the next input port. Accessories Get more from your presentations with HP projector accessories. You can purchase accessories at http://www.hp.
Setting up the projector Positioning the projector The following tables show you where to position the projector in relation to the screen. TIP: For best picture quality, place the projector 1.
Image size relative to distance from the screen—vp6310 series Image size (diagonal) Image size (width) Distance (lens to screen) (inches) (meters) (inches) (meters) (inches) (meters) 30 0.8 24 0.6 41 to 48 1.1 to 1.2 40 1.0 32 0.8 55 to 64 1.4 to 1.6 60 1.5 48 1.2 83 to 96 2.1 to 2.4 80 2.0 64 1.6 110 to 128 2.8 to 3.3 100 2.5 80 2.0 138 to 160 3.5 to 4.1 120 3.0 96 2.4 166 to 192 4.2 to 4.9 150 3.8 120 3.0 207 to 240 5.3 to 6.1 180 4.6 144 3.
Image size relative to distance from the screen—vp6320 series Image size (diagonal) Image size (width) Distance (lens to screen) (inches) (meters) (inches) (meters) (inches) (meters) 30 0.8 24 0.6 43 to 50 1.1 to 1.3 40 1.0 32 0.8 58 to 67 1.5 to 1.7 60 1.5 48 1.2 87 to 101 2.2 to 2.6 80 2.0 64 1.6 116 to 134 2.9 to 3.4 100 2.5 80 2.0 145 to 168 3.7 to 4.3 120 3.0 96 2.4 174 to 202 4.4 to 5.1 150 3.8 120 3.0 217 to 252 5.5 to 6.4 180 4.6 144 3.
Connecting power 1. Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front of the screen. Ideally, the platform should be lower than the bottom of the screen. 2. Connect one end of the power cord to the back of the projector grounded electrical outlet 2. 3. Turn on the main disconnect switch 1 and the other end to a 3 on the back of the projector. If you want to permanently install the projector on the ceiling or behind the screen, see “Installing the projector” on page 49.
Connecting a computer Requires: 1 • USB cable 2 (optional) • VGA cable • Audio cable, mini-phone 3 (optional) The optional USB connection allows you to use the mouse and page up/down features on the remote control. See “Showing a computer screen” on page 31. TIP: If the computer display does not appear on the projector, you might have to press a combination of keys on the computer to turn on the computer’s VGA output. For example, on some computers you must press FN+F4 or FN+F5.
Connecting a handheld organizer Not all handhelds come with VGA-out ports. For example, an iPAQ Pocket PC may require a VGA-out PC Card with 15-pin connector. If necessary, install a VGA-out accessory card into the organizer.
Connecting a video source Many video devices have more than one type of output port. When you connect the device to the projector, choose the connection that provides the best picture quality. This list shows video connections in order with highest picture quality at the top: • DVI connection (highest quality) • Component-video connection • S-video connection • Composite-video connection The video and audio cables shown in the following sections are available from HP.
Connecting a component-video source Examples: Cable boxes, DVD players, satellite receivers, and audio-video receivers Requires: • Component-to-VGA cable • Audio cable, RCA 1 2 (optional) TIP: Many DVD players and other high-quality video devices provide component video output. The three RCA connectors might be labeled YPbPr or YCbCr. If possible, configure the video source to use progressive scan output, such as 480p, 575p, or 720p.
Connecting an S-video source Examples: DVD players, VCRs, cable boxes, camcorders, and video gaming devices Requires: • S-video cable 1 • Audio cable, RCA 24 Setting Up 2 (optional)
Connecting a composite-video source Examples: VCRs, DVD players, audio-video receivers, and video gaming devices Requires: • Composite-video cable • Audio cable, RCA 1 2, or combined video-audio cable (optional) Setting up the projector 25
Turning the projector on and off Turning the projector on 1. Be sure the power cord is connected and the main disconnect switch is on. 2. Open the lens by sliding the lens cover 3. Press the power button 1 to the left. 2 on the projector or on the remote control. The projector takes a minute or so to warm up. The power button blinks during warm-up. TIP: If the picture does not appear on the screen, try the following: • If you are using a computer, press the key combination that turns on its video output.
NOTE: It is normal for parts of the projector and the air coming out of the projector to be very warm. If the projector starts to overheat, the temperature warning light will turn on and the projector will shut down. Turning the projector off 1. Press the power button on the projector or remote control to turn off the projector. Do not hold the button down. The power button blinks during the cool-down period, then the projector turns off.
Making basic adjustments This section provides instructions for making basic adjustments to the projector. Aiming the projector • To raise or lower the projected picture on the screen, press the height adjustment button 1 and raise or lower the front of the projector 2. Release the button to lock the adjustment. • To level the picture on the screen, turn the adjustable foot 3 to lengthen or shorten the foot. Adjusting the focus and zoom 1. Rotate the focus ring until the image becomes clear.
Using the remote control To do this... Press this... Hide or unhide the picture hide button Move mouse pointer on computer Edge of the mouse pad 2 in the direction you want the pointer to move. This feature requires a USB connection between the projector and computer. Turn the projector on or off Power button Click mouse button on computer Left-click or right-click button 4. This feature requires a USB connection between the projector and computer.
To do this... Press this... Change picture settings for different type of input signal Picture mode button Change settings using on-screen menu enter and navigation buttons 8. See “Using the on-screen menu” on page 38. Exit from any on-screen menu or adjustment Exit Switch to next input source source button button 7 one or more times. 8. 9 one or more times. TIP: From within the distance of 9 m (30 ft), aim the remote control at the screen or at the front or back of the projector.
2 Showing Presentations Showing a computer screen 1. Be sure the computer is connected to the projector and turned on. See “Connecting a computer” on page 20. 2. Be sure the projector is set up, turned on, and adjusted. See “Making basic adjustments” on page 28. 3. If a different input source is shown on the projector, press the source button on the projector or remote control one or more times to select the VGA-in port. 4.
Showing Presentations
3 Adjusting the Projector Adjusting the picture and sound Choosing the best picture mode You can quickly choose a different picture mode to make adjustments to the picture. Picture modes can control properties such as color and size. They let you easily choose the best settings for ambient lighting and the type of video content (see “Adjusting the picture and sound” on page 33). S Press the picture mode best picture.
You can also customize the picture modes so they are best for your video sources: 1. Press the picture mode button to select the picture mode you want to adjust. 2. Press enter and go to Picture > Customize picture mode. 3. Adjust the settings until you are satisfied with the picture. TIP: To exit from any on-screen menu or adjustment, press the exit button.
Adjusting a slanted picture If the projector is tilted up or down, the sides of the picture on the screen might slant in or out, even though the top and bottom are level. The keystone adjustment corrects this problem. S Press the keystone adjustment on the projector until the picture looks correct. You can also make the keystone adjustment in the on-screen menu. Press enter, and go to Setup > Keystone to adjust the picture.
Adjusting the picture for best color You can fine tune the picture settings on your projector to get the best color and image quality. You should perform these steps for each input source device and each input port that you use. Do them in the order shown. For some input ports, some of these settings may not be available. 1. Press the picture mode source. button and select the picture mode you want to use for the current 2. Press enter and go to the Picture menu. 3. Go to Color settings > Brightness.
Adjusting the volume You can control the volume of the projector’s speakers: • To change the volume of the projector’s speakers, press enter, go to Sound > Volume, and change the setting. • To turn the sound on or off temporarily, press enter, go to Sound > Mute, and mute the sound. Adjusting other sound settings 1. Press enter, and go to Sound. 2. Set the sound adjustments. From the Sound menu, you can adjust sound settings, such as mute, volume, and speaker operation.
4. When prompted, confirm the new sequence and press enter. NOTE: If you set an unlock sequence, you must press the sequence every time you turn on the projector. The sequence protects the projector only when the projector is turning on, not at any other time. If you forget the unlock sequence, you must call HP support to unlock the projector. You must have the projector and your proof of purchase.
Input menu For a visual aid, see “Back panel” on page 12. Input menu VGA Shows the source connected to the VGA-in port. S-video Show the source connected to the S-video port. Composite Shows the source connected to the composite-video port. DVI Shows the source connected to the DVI port (available only on certain models). Scan inputs Sets whether the projector automatically searches for input signals and displays the next one found.
Picture menu Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments are shown in gray in the on-screen menu. Picture menu Color settings... Adjusts the picture and colors. Brightness Brightens or darkens the picture. Contrast Sets the difference between light and dark areas. Sharpness Sharpens or softens the picture. Color saturation Adjusts the intensity of colors. Tint Shifts colors toward red or green.
Picture menu (continued) Color temperature Stretch Shifts color toward red or blue. Selects how the picture fits on the screen: • Best fit automatically fits the picture without stretching it. • 1-to-1 shows each picture dot as one projected dot. • Reduced fits a standard-shape picture onto a widescreen projection screen. Picture shift Moves the picture within the projection area. This is useful if you are viewing a picture that is smaller than the full projection area, such as a widescreen movie.
Setup menu (continued) Advanced setup... Adjusts additional setup settings. Power timeout Sets the length of time the projector waits for an input signal before automatically shutting down. Projector position Adjusts the picture to match the orientation of the projector: upright or upside-down, in front of or behind the screen. Inverts or reverses the image accordingly. Projector lock Sets or cancels a secret button sequence that must be entered for the projector to operate.
4 Maintaining the Projector Performing routine maintenance Getting the projector status To get the projector status: S Press the enter button on the projector or remote control and go to Help. This screen shows information and status for the projector. Cleaning the projector lens You can clean the front lens of the projector using the following recommendations. You cannot clean any of the internal surfaces.
Replacing the lamp module As the projector operates over time, the brightness of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage. You can install a new lamp at any time to bring the projector up to factory-fresh brightness. We recommend replacing the lamp if a warning message is displayed. WARNING! Replacing the lamp module requires special consideration: • To reduce the risk of injury, be careful when removing the lamp module as broken glass might be present.
5. Loosen the two screws 4 on the lamp module, and pull out the module 5. 6. Insert the new lamp module into the projector and tighten the two screws. 7. Plug in the lamp connector. 8. Snap the lamp cover into place. 9. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp. 10.Press enter, go to Setup > Advanced setup > Reset lamp hours, and press enter.
Replacing the battery in the remote control 1. Use a ballpoint pen to hold the battery latch toward the center, then pull out the battery holder 1. 2. Insert the new battery 3. Push the holder 2 in the holder. 3 into the remote control. When discarding old batteries, contact your local waste-disposal provider regarding local restrictions on the disposal or recycling of batteries.
Upgrading the projector Updating the firmware HP might periodically release updated versions of the projector firmware to enhance the projector performance. The projector firmware version is shown in the on-screen menu at Help. Check for updated versions at http://www.hp.com/go/proj_firmware. USB method 1. On a computer with a USB port, go to the HP projector upgrade website (see introduction for this section) and download the latest file intended for a USB upgrade. 2.
Maintaining the Projector
5 Installing Permanently Installing the projector Choosing cables If you are permanently installing the projector or using it with long cables, consider the following suggestions when planning the installation: • Use high-quality cables. Use only video cables that are made with 75-ohm coaxial cable and connectors. For high-resolution video, use low-loss video cables. For standard audio, use audio cables that are shielded. For digital audio, use 75-ohm coaxial cables.
1. Attach the projector to the ceiling using an HP ceiling mount kit. Refer to the installation instructions provided with the ceiling mount kit. 2. After the projector is mounted on the ceiling, adjust the projector settings to match this setup. Press enter, go to Setup > Advanced setup > Projector position, and select Front Ceiling. Installing for rear projection 1. Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is designed for rear projection.
TIP: As an alternative, you can loop a cable or bracket around the projector handle to secure the projector in place. Controlling an external accessory If your projector has a 12-volt trigger output port, the projector can automatically control one or more accessories. Certain types of accessories can use a 12-volt signal to trigger their actions, such as a motorized screen lowering and raising the screen. The output provides a 12-volt dc signal whenever the projector is on (200 mA maximum current output).
Connecting to a room controller If your projector has a serial port, you can connect the projector to a room controller using a serial (RS-232) cable. After you program the room controller using the following commands, you can use the room controller to operate the projector and other components of your installation.
The following table shows the specific syntax to use for various requested tasks. To perform this task... Use this request syntax... Change a setting to a specified value *command=value Ask the current setting *command=? Increment a setting *command=+ Decrement a setting *command=– Invoke an action (no parameter needed) *command In general, every request sent to the projector generates one or more notification messages, which are sent to the room controller.
• Command that is currently unavailable—command with “?” added • Invalid parameter—command with current value • Action command with unnecessary parameter—action command • Action command that is unavailable—action command The following simplified example shows how the projector typically responds to a request to change the active input source. Note that the three latter notifications are delayed.
Video functions Command Parameters Description CSPC 0 to 2, ? Sets or queries the active color space: 0=RGB, 1=YPbPr, 2=YCbCr. PMOD 0,1,5,? Sets or queries the picture mode: 0=graphics, 1=video, 5=custom. VSHF value, +, –, ? Sets or queries the vertical shift of the projected image: usable range is determined by the active input source. HSHF value, +, –, ? Sets or queries the horizontal shift of the projected image: usable range is determined by the active input source.
Video functions (continued) Command Parameters Description VPOS value, +, –, ? Sets or queries the vertical positioning of the projected image: usable range is the maximum and minimum allowed by the active computer input source. HPOS value, +, –, ? Sets or queries the horizontal positioning of the projected image: usable range is the maximum and minimum allowed by the active computer input source. HIDE 0, 1, ? Sets or queries picture blanking: 0=not hidden, 1=hidden.
Setup functions (continued) Command Parameters Description THRS ? Queries the total time (in tenths of hours) that the projector has been in use. POS 0 to 3, ? Sets or queries the projector’s position: 0=front table, 1=front ceiling, 2=rear table, 3=rear ceiling. TMO 5 to 20, ? Sets or queries the menu timeout setting (seconds) PTMO 0, 3 to 6, ? Sets or queries the power timeout: 0=never, 3=15 min, 4=30 min, 5=60 min, 6=120 min.
Power and status functions (continued) Command Parameters Description STAT ? Queries the projector's current state: 0=standby state (off), 1=on, 2=warm-up state, 3=cool-down state. ALERT Not a request Notifies when a system alert condition occurs: 0=lamp life warning, 1=lamp life reached, 2=lamp faulty, 3=lamp problem, 4=internal temperature too high, 5=fan problem, 6=ambient temperature too high, 7=color wheel problem, 8=lamp cover open.
6 Fixing Problems Troubleshooting suggestions If you have a problem with your projector, check the following statement that most closely matches the nature of the problem, then look in that section of this chapter: • “Warning light problems” on page 59 • “Start-up problems” on page 60 • “Picture problems” on page 60 • “Sound problems” on page 63 • “Interruption problems” on page 63 • “Remote control problems” on page 63 TIP: If these suggestions do not solve your problem, go to http://www.hp.
If the red lamp light is flickering quickly: • Check that the cover over the lamp at the side of the projector is correctly installed and fully attached. Check the tab at the top of the cover and latch at the bottom. Start-up problems If no lights or sounds turn on: • Be sure that the power cable is securely connected to the projector and the other end is plugged into an outlet with power. • Be sure the main disconnect switch is turned on. • Press the power button again.
• For a computer connection, set the display resolution as the computer to the same resolution as the projector, 800 × 600 or 1024 × 768 (see “Specifications” on page 65). If the computer has multiple monitors, adjust the resolution of the monitor assigned to the projector. • For a computer connected to the S-video port, the picture cannot be as high resolution as what you see on the computer display.
• Press enter, go to Help > Diagnostics, and run the color test. • Press enter, go to Picture > Color settings > Reset color settings, and press enter. • Press enter, go to Setup > Reset all settings, and press enter. If the picture is not clear (ghost images, smearing, poor quality): • Be sure the video cable you are using is coaxial cable rated at 75 ohms. Any other cable or impedance rating can reduce picture quality.
Sound problems If no sound is coming out of the projector: • Be sure you have an audio cable securely connected between the projector and the source device. • Press enter, go to Sound, and check that Mute is turned off and Volume is correct. • Press enter, go to Sound > Internal speakers, and be sure the speakers are turned on. • Press enter, go to Help > Diagnostics, and run the sound test. • Be sure that the mute and volume settings are correct on the source device, such as a VCR, camcorder, or computer.
Testing the projector Running the projector diagnostics The on-screen menu contains diagnostic tests you can use to verify the proper operation of the projector and the remote control. 1. Press enter and go to Help > Diagnostics. 2. Select a test and press enter. 3. Follow the displayed instructions.
7 Reference This chapter lists the specifications, safety information, and regulatory information for the projector. Specifications Because HP continually improves its products, the following specifications are subject to change. For the latest specifications, visit the HP website at http://www.hp.com. Projector Specifications Size 280 × 255 × 102 mm (11.0 × 10.1 × 4.0 in.) Weight 3.5 kg (7.
Projector Specifications (continued) IR receivers Lamp Front and back of projector 210-watt lamp 4000-hour average lamp life (to half of original brightness) Lamp saver mode reduces lamp power to 168 watts Replacement lamp: L1695A Optics 1 to 10 m (3 to 33 ft) focus range 1.16:1 optical zoom vp6310 series: 1.7 to 2.0 throw ratio (distance/width) 128% offset (relative to half-height) vp6320 series: 1.8 to 2.
Projector Specifications (continued) Environment Operating: Temperature: 10 to 35 °C (50 to 95 °F) Humidity: 80% RH max, non-condensing Altitude: up to 3,000 m (10,000 ft), up to 25 °C (77 °F) Storage: Temperature: –20 to 55 °C (–4 to 131 °F) Humidity: 80% RH max, non-condensing Altitude: up to 12,000 m (40,000 ft) Video mode compatibility Compatibility Resolution Refresh rates (Hz) 640 × 350 70, 85 640 × 400 85 640 × 480 60, 66.66, 66.
Video mode compatibility (continued) Compatibility Resolution Refresh rates (Hz) 640 × 480 60, 72, 75, 85 720 × 400 70, 85 SVGA 800 × 600 56, 60, 72, 75, 85 XGA 1024 × 768 60, 70, 75 SXGA 1280 × 1024 60, 75 SXGA+ 1400 × 1050 60 Safety information LED safety The infrared ports located on the digital projector and remote control are classified as Class 1 LED devices according to International Standard IEC 825-1 (EN60825-1).
Regulatory information This section presents information that shows how your digital projector complies with regulations in certain regions. Any modifications to your digital projector not expressly approved by HP could void the authority to operate the digital projector in these regions. U.S.A. This digital projector has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Japan Korea International For regulatory identification purposes, your product is assigned a regulatory model number. The regulatory model number for your product is listed in the declaration of conformity. This regulatory number is different from the marketing name and product number.
Declaration of conformity Manufacturer's name: Manufacturer's address: According to ISO/IEC Guide 22 and EN 45014 Hewlett Packard Company Hewlett Packard Company Digital Projection & Imaging 1000 NE Circle Blvd.
Reference
Index A accessories 15 adjusting color 36 picture 33 setup 37 shape of picture 34 slanted picture 35 sound 33 aiming projector 28 analog video mode compatibility 67 audio adjusting 33 ports 12 troubleshooting 63 B buttons location 11 opening menu 38 C cables choosing 49 connections 22 ceiling installation 49 choosing cables 49 cleaning 7, 43 component-video connecting source 23 port 12 composite-video connecting source 25 port 12 computer screen, showing 31 computer, connecting 20 connecting component-vi
R rear projection installation 50 regulatory information 69 remote control buttons 14 installing batteries 46 opening menu 38 troubleshooting 63 using 29 replacing lamp 44 room controller 52 room layout 16 RS-232 52 S safety information 7, 68 SCART 22 screen controlling 51 positioning 17 security locking cable 50 security code 37 selecting video source 31 serial port 52 setting up 16 shape, adjusting 34 showing picture 31 showing presentations 31 slanted picture, adjusting 35 specifications 65 S-video conn
Mercury Safety WARNING: This digital projector lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred, discard any nearby food and drink, and thoroughly clean the table surface around the projector. Wash your hands after cleaning the area or handling a broken lamp. Disposal of this lamp may be regulated due to environmental considerations.
