HP ZBook 17 G2 Mobile Workstation Maintenance and Service Guide

Solid-state drive
Description Spare part number
512 GB, SATA-3 795969-001
512 GB, SATA-3, SED, Opal2 815841-001
512 GB, Z Turbo Drive PCIe 815840-001
256 GB, SATA-3 795966-001
256 GB, M2, PCIe-2×2 794731-001
256 GB, SATA-3, Locked 806895-001
256 GB, SATA-3, SED, Opal2 795968-001
256 GB, Opal2, Locked 830147-001
240 GB, SATA-3 795965-001
180 GB, SATA-3 795964-001
128 GB, SATA-3 795963-001
128 GB, Z Turbo Drive PCIe 815839-001
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the service cover (see Service cover on page 43).
Remove the solid-state drive:
1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the solid-state drive to the computer. (The
solid-state drive tilts up.)
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts