HP ZBook 17 G2 Mobile Workstation Maintenance and Service Guide

4. Insert a screw driver or similar thin tool into the keyboard release opening in the optical drive bay, and
then press on the back of the keyboard until the keyboard disengages from the computer.
5. Turn the computer right side up with the front toward you.
6. Open the computer as far as it will open.
7. Lift the rear edge of the keyboard, and then swing it up and forward until it rests upside down on the
palm rest.
8. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and then
disconnect the keyboard cable from the system board.
9. Release the ZIF connector (2) to which the pointing stick cable is attached, and then disconnect the
pointing stick cable (2) from the system board.
Component replacement procedures 59