HP ZBook 17 G2 Mobile Workstation Maintenance and Service Guide

6. Remove the optical drive (see Optical drive on page 52) or Upgrade Bay hard drive (see Upgrade Bay
hard drive on page 54).
7. Remove the keyboard (see Keyboard on page 57).
Remove the primary memory module:
1. Spread the retetntion tabs (1) on each side of the primary memory module slot to release the primary
memory module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the primary memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch to prevent incorrect installation into the primary
memory module slots.
Reverse this procedure to install a primary memory module.
Component replacement procedures 61