HP ZBook 17 G2 Mobile Workstation Maintenance and Service Guide

Top cover
Description Spare part number
Top cover 735587-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the service cover (see Service cover on page 43).
6. Remove the optical drive (see Optical drive on page 52) or upgrade bay hard drive (see Upgrade Bay
hard drive on page 54).
7. Remove the keyboard (see Keyboard on page 57).
NOTE: When replacing the top cover, be sure that the following components are removed from the
defective top cover and installed on the replacement top cover:
●
Multifunction board (see Multifunction board on page 71)
●
Speakers (see Speakers on page 73)
●
Fingerprint reader (see Fingerprint reader on page 74)
●
Power button board (see Power button board on page 75)
Remove the top cover:
1. Close the computer.
2. Turn the computer upside with the front toward you.
Component replacement procedures 67