HP ZBook 17 G2 Mobile Workstation Maintenance and Service Guide

a. Remove the eight Phillips PM2.0×3.0 screws (1) that secure the hinge assemblies to the
display panel.
b. Remove the hinge assemblies (2).
The hinge assemblies are available in the Display Hinge Kit using spare part number 733634-001.
20. If it is necessary to replace the display panel cable:
a. Detach the display panel cable (2) from the display enclosure. (The display panel cable is attached
to the display enclosure with double-sided tape.)
b. Remove the display panel cable (2).
The display panel cable is available in the Cable Kit, 785212-001.
Reverse this procedure to install the display assembly.
Component replacement procedures 81