HP ZBook 17 G2 Mobile Workstation Maintenance and Service Guide

3. Lift the tape that covers the connector on the back of display panel (1), and then disconnect the display
panel cable (2).
4. Remove the eight Phillips PM2.0×3.0 screws (1) that secure the display panel to the display hinge
brackets.
5. Slide the display panel up and out of the display hinge brackets (2).
To replace the remaining display assembly components, remove the display assembly from the computer.
Reverse this procedure to install the display panel. For more information, see Display assembly on page 81.
Component replacement procedures 69