HP LaserJet Pro MFP M329, M428-M429 - Certificate of Volatility

Model:
HP LaserJet Pro M428
HP LaserJet Pro M429
HP LaserJet Pro M329
Part Number:
M428dw= W1A28A; M428fdw= W1A30A
M429dw= W1A33A; M429fdw= W1A35A;
M428dw= W1A31A; M329dw = W1A24A
Volatile Memory
Does the device contain volatile memory (Memory whose contents are lost when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (SRAM, DRAM, etc):
Size:
512M
User Modifiable:
Function:
Used for temporary storage
during the processing of jobs
and for applications running on
the OS.
Steps to clear memory:
When the printer is powered
off, the memory is erased
Yes No
Type (SRAM, DRAM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
.
Type (SRAM, DRAM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Non-Volatile Memory
Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Flash
512MB
Yes No
Device FW
NA
Type (Flash, EEPROM, etc):
EEPROM
Size:
32KB
User Modifiable:
Function:
User setting parameters for printer
Steps to clear memory:
Restore factory defaults from
control panel or EWS
Yes No
Type (Flash, EEPROM, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
Mass Storage
Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (HDD, Tape, etc):
Size:
User Modifiable:
Function:
Steps to clear memory:
Yes No
USB
Does the item accept USB input and if so, for what purpose (i.e. Print Jobs, device firmware updates, scan upload)?
Yes No If Yes please describe below
Rear USB host when configured will accept stored jobs, encrypted files stored and deleted by user.
Can any data other than scan upload be sent to the USB device)?
Yes No If Yes please describe below
Rear USB host when configured will accept stored jobs, encrypted files stored and deleted by user.
RF/RFID
Does the item use RF or RFID for receive or transmit of any data including remote diagnostics. (e.g. Cellular phone,
Bluetooth) Yes No If Yes please describe below
Purpose: BLE (Bluetooth Low Energy)
Frequency: BLE 2.4 to 2.485 GHz band
Bandwidth: 0.27 Mbit/s
Modulation: Gaussian frequency shift modulation
Effective Radiate Power (ERP): 10mW max
Specifications:
HP Certificate of Volatility
Address:
HP Inc.
11311 Chinden Blvd.
Boise, Idaho 83714, USA