User Manual

● Select the 600 dpi option, if available.
● Select the EconoMode check box to enable it.
If the entire page is too light, use these settings:
● Select the FastRes 1200 option, if available.
● Clear the EconoMode check box to disable it.
5. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to
print the job.
Adjust print density
Adjust the print density when your printing results are too dense or too light in color.
Complete the following steps to adjust the print density:
1. Open the HP Embedded Web Server:
a. From the Home screen on the printer control panel, touch the Wireless icon or the Ethernet icon
to view the printer's IP address or host name.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If a message displays in the web browser indicating that the website might not be safe, select
the option to continue to the website. Accessing this website will not harm the computer.
2. On the EWS Home page, click the Tools tab.
3. In the left navigation pane, click Utilities to expand the options, and then click Print Density.
4. Under Print Density, adjust the setting as desired.
5. Click Apply to save the changes.
Troubleshoot image defects
Review examples of image defects and steps to resolve these defects.
ENWW Resolving print quality problems 147