HP PageWide Managed P75050dw - Certificate of Volatility

Letter of Volatility
Model Number:
Part Number:
Manufacturer:
HP PageWide Managed
P75050dw
Y3Z47A
Street Address:
HP, Inc.
1115 SE 165
th
Ave, Suite 210
Vancouver, WA 98683
Volatile Memory
Does the item contain volatile memory (i.e., memory whose contents are lost when power is removed)?
 Yes  No
If the answer is “Yes”, please provide the following information for each type (use additional sheets if required)
Type (SRAM, DRAM,
etc):
DDR3 DRAM (3 devices)
Size
512MB
+
512MB,
and
512MB
User Modifiable:
 Yes
 No
Function:
Contains
decompressed
system
firmware and
print data
during printing
Process to Sanitize:
Power Off printer
Type (SRAM, DRAM,
etc):
Size:
User Modifiable:
 Yes
 No
Function:
Process to Sanitize:
Non-Volatile Memory
Does the item contain non-volatile memory (i.e., memory whose contents are retained when power is
removed)?  Yes  No
Type (eMMC, Flash,
EEPROM, etc):eMMC (1
device)
Size:
8GB
eMMC
User Modifiable:
 Yes
 No
Function:
System
Firmware and
firmware
upgrade,
system control
data, user
preferences,
user variables,
image data,
and encrypted
job storage
and PIN
printing.
Process to Sanitize:
On units with older versions of Firmware
(versions LIMOFWPP1N002 through
1N005), User preferences and user
variables, image data, and encrypted job
storage and PIN printing cleared by
performing a reset via “Restore Factory
Defaults”. Access to this function can be
found under:
Home menu
Support tools
Maintenance
“Restore Factory Defaults”
On units with newer versions of Firmware
(version LIMOFWPP1N006 or greater),
User preferences and user variables,
image data, and encrypted job storage
and PIN printing cleared by performing a
reset via the “Cold Reset”
function. Access to this function can be
found under:
Home menu
Support tools
Service (Note: the user needs to
enter the Service pin
number at this screen
and after, the unit will
boot into the Service
mode screen)
Maintenance
Restore Factory Defaults
Cold Reset