HP LaserJet Analog Fax Accessory 500 - Fax Guide

4. Touch the Default Billing Code text box to open the keyboard.
5. Enter the billing code and then touch the OK button.
6. Touch the Minimum Length text box to open the keypad.
7. Type the minimum number of digits you want in the billing code, and then touch the OK button.
8. Touch the Save button.
Receive fax settings
Use the Fax Receive Setup menu to configure the following features:
●
Fax receive setup
●
Advanced image processing settings
●
Enable or disable the fax printing schedule
●
Block incoming faxes
●
Default job options
●
Set the paper tray
Fax receive setup
Set the ringer volume
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Fax Receive Setup
3. Touch the Ringer Volume drop down menu and then select one of the following ringer volume
settings:
●
Off
●
Low (default)
●
High
4. Touch the Save button to save the ringer volume setting.
Set rings-to-answer
The rings-to-answer setting determines the number of times the phone rings before the call is
answered by the fax accessory.
NOTE: The default setting range for rings-to-answer is country/region-specific. The range of
possible rings-to-answer is limited by country/region.
ENWW Fax settings 91