HP LaserJet Analog Fax Accessory 500 - Fax Guide

Set ring frequency
NOTE: The default ring frequency covers a broad frequency range, and should rarely require
adjustment.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Fax Receive Setup
3. Touch the box beneath the Ring Frequency heading to open the keypad.
4. Enter a value for the ring frequency on the keypad, and then touch the OK button. The default
setting for ring frequency is 68 hz.
5. Touch the Save button.
Advanced image processing settings
Use the advanced image settings to enhance scanned images in several ways. The following settings
can be adjusted:
●
Adjust sharpness
●
Erase edges
●
Automatic color detection
●
Automatic page cropping
●
Automatic image orientation
●
Automatic tone adjustment
Adjust sharpness
Adjust the Sharpness setting to clarify or soften the image. For example, increasing the sharpness
can make text appear crisper, but decreasing it can make photos appear smoother.
1. From the Home screen, touch the Fax button.
2. Complete the fields on the first screen to specify the fax recipient information.
3. Touch the More Options button at the bottom of the screen.
4. Touch the Image Adjustment button.
NOTE: If the Image Adjustment button is not on the first page of options, touch the More
Options button again to scroll to the next page.
5. Adjust the Sharpness slider to the left to decrease the sharpness, or adjust it to the right to
increase the sharpness.
ENWW Fax settings 93