HP LaserJet Analog Fax Accessory 500 - Fax Guide

1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Stamp Received Faxes
3. Touch the Disabled option (default) to disable the stamp, or touch the Enabled option to enable
the stamp.
4. Touch the Save button.
Set fit-to-page
When selecting a page size to print a fax, the product determines the closest page size that matches
the intended size from sizes available in the product. If the fit-to-page setting is enabled and the
received image is larger than that page size, the product attempts to scale the image to fit the page. If
this setting is disabled, an incoming image larger than the page splits across pages.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Fit to Page
3. Touch the Enabled option (default) to enable fit-to-page, or touch the Disabled option to disable
fit-to-page.
4. Touch the Save button.
Set the paper selection
Use the paper selection feature to specify which tray the paper for the fax is loaded from.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Receive Settings
●
Default Job Options
●
Paper Selection
3. Touch one of the following options:
ENWW Fax settings 99