HP LaserJet Analog Fax Accessory 500 - Fax Guide

4. Unscrew the thumb screws and pull the formatter from the product.
CAUTION: The formatter board and the fax accessory card contain parts that are sensitive to
electrostatic discharge (ESD). When handling the formatter board or the fax accessory card, use
static protection such as the following: 1) A grounding wrist strap that is connected to the metal
frame of the product. 2) Hold the metal frame of the formatter in your hand.
5. If necessary, remove the label that covers the fax port on the formatter.
6. Remove the fax accessory from its packaging.
CAUTION: The formatter board and the fax accessory card contain parts that are sensitive to
electrostatic discharge (ESD). When handling the formatter board or the fax accessory card, use
static protection such as the following: 1) a grounding wrist strap that is connected to the metal
frame of the product. 2) Hold the metal frame of the formatter in your hand.
ENWW Install the fax accessory 63