HP LaserJet Analog Fax Accessory 500 - Fax Guide

Fax settings
The following sections detail the various settings for sending and receiving faxes.
●
Send fax settings
●
Receive fax settings
●
Fax archive and forwarding
●
Polling
Send fax settings
Use the Fax Send Setup menu to configure the following features:
●
Fax dialing settings
●
General fax send settings
●
Default job options
●
Billing codes
Fax dialing settings
Set the fax dial volume
Use the Fax Dial Volume setting to control the product's dialing volume level when sending faxes.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
Fax Dialing Settings
3. Touch the Fax Dial Volume drop-down menu and select one of the following settings:
●
Off
●
Low (default)
●
High
4. Touch the Save button to save the fax volume setting.
Set the dialing mode
The dialing mode setting sets the type of dialing that is used: either tone (touch-tone phones) or pulse
(rotary-dial phones).
To set the dialing mode, perform the following steps.
ENWW Fax settings 79