HP PageWide 750, 765, 772, 776, 777, 780, 785, P75050, E75160, P75250, P77440, E77650, E77660, P77740, P77750, P77760, P77940, P77950, P77960 - Printhead Assembly Install Guide

11.1

11.3

11.5

11.2

11.4

11.6

Reverse the removal steps to install the assembly. Also use the following

special installation instructions.

SPECIAL INSTALLATION INSTRUCTIONS: Standard output bin

a. Before proceeding, locate the mounting rail (callout 1) on the output bin..

c. Align the mounting rail on the output bin with the mounting rail on the

printer.

e. Continue to slide the output bin into place, and make sure that the inner clip

(callout 1) engages the slot in the sheet-metal chassis (callout 2).

b. Before proceeding, locate the mounting rail (callout1) on the printer.

d. Slide the output bin about halfway in, and then slightly lift the right side of

the output bin so that the inner clip (callout 1) will pass over the sheet-metal

chassis (callout 2).

f. Slide the output bin straight onto the printer.

IMPORTANT: Slide the output bin completely into place. Make sure it slides

straight onto the printer.



J7Z09-90925.indd 13 8/3/2017 9:40:12 AM