HP PageWide 750, 765, 772, 776, 777, 780, 785, P75050, E75160, P75250, P77440, E77650, E77660, P77740, P77750, P77760, P77940, P77950, P77960 - Printhead Assembly Install Guide

12.3 12.4
c. At the left side service fluid container mounting rail, rotate the blue latch to
the open position.
d. Rotate the left mounting pin up and out of the rail (callout 1), slightly slide
the service fluid container to the left (callout 2) to release the right mounting
rail pin, and then remove the service fluid container (callout 3).
13
13.1 13.2
a. Position the service fluid container right rail pin in the mounting rail (callout
1/2), and then rotate the left rail mounting pin down and into the rail (callout
3).
b. At the left side service fluid container mounting rail, rotate the blue latch to
the closed position.
SPECIAL INSTALLATION INSTRUCTION: PRINTHEAD ASSEMBLY
(install a replacement service fluid container)
CAUTION: A replacement service fluid container is supplied with a replacement printhead assembly. The replacement service fluid container must
be installed before the printer power is turned on after installing the replacement print head assembly. Follow the instructions below to install a
replacement service fluid container
NOTE: After the replacement fluid service container is installed, do one of the following
• HP PageWide Pro 750/772/777: go to step 14.
• HP PageWide Enterprise 765/780/785: go to step 15.
15
J7Z09-90925.indd 15 8/3/2017 9:40:13 AM