HP PageWide 750, 765, 772, 776, 777, 780, 785, P75050, E75160, P75250, P77440, E77650, E77660, P77740, P77750, P77760, P77940, P77950, P77960 - Printhead Assembly Install Guide

Remove the output bin
7
7.1
7.3
7.5
7.2
7.4
Disconnect one flat-flexible cable (FFC), and then remove two screws (callout
2).
777zt and 777hc/z only: At the right side of the printer, pull out the output bin
alignment bar to remove it.
Pull the output bin straight out of the printer to remove it.
Remove two flaps (callout 1) from the output shaft.
NOTE: These flaps snap onto the shaft.
Squeeze two tabs together (callout 1), and then slightly slide the output bin
towards the front of the printer (callout 2).).

1
2

1


1
2
6
J7Z09-90925.indd 6 8/3/2017 9:40:06 AM