HP PageWide MFP P77740-60 series - User Guide

8 Fax
●
Set up fax
●
Set fax settings
●
Send a fax
●
Receive a fax
●
Use the phone book
●
Use reports
Set up fax
●
Connect fax to a telephone line
●
Congure fax settings
●
Set up HP Digital Fax
●
Fax programs, systems, and software
Connect fax to a telephone line
▲
Connect the telephone cable to the fax port (1) on the product and to the telephone jack on the wall.
CAUTION: To reduce the risk of re, use only No. 26 AWG or larger telecommunication line cord.
The product is an analog device. HP recommends using the product on a dedicated analog telephone line. If
you are using a digital environment, such as DSL, PBX, ISDN, or VoIP, make sure to use the correct lters and
congure the digital settings correctly. For more information, contact your digital service provider.
NOTE: Some countries/regions might require an adapter to the phone cord that came with the product.
Congure fax settings
●
To congure fax settings from the control panel
●
To congure fax settings using the HP Digital Fax Setup Wizard
To congure fax settings from the control panel
You can congure the product fax settings from the control panel or from the HP Embedded Web Server.
ENWW Set up fax 87