HP PageWide MFP P77740-60 series - User Guide

Set fax settings
●
Send-fax settings
●
Receive-fax settings
Send-fax settings
●
Set pauses or ash hooks
●
Set a dialing prex
●
Set tone-dialing or pulse-dialing
●
Set autoredial and the time between redials
●
Set the light/dark setting
●
Set the default resolution
●
Use cover-page templates
Set pauses or ash hooks
You can insert pauses into a fax number that you are dialing. Pauses are often needed when dialing
internationally or connecting to an outside line.
To access these symbols, touch the * character on the keypad. Then, touch one of the following buttons:
Special symbol Button Description
Pause for dial tone The W button is available on the control panel keypad for entering a fax
number. This character causes the product to wait for a dial tone before dialing
the remainder of the telephone number.
Hook ash The R button is available on the control panel keypad for entering a fax number.
This character causes the product to insert a hook ash.
Set a dialing prex
A dial prex is a number or group of numbers that are automatically added to the beginning of every fax
number you enter at the control panel or from the software. The maximum number of characters for a dial
prex is 50.
The default setting is O. You might want to turn this setting on and enter a prex if, for example, you have to
dial a number such as 9 to get a telephone line outside of your company telephone system. While this setting
is active, you can dial a fax number without the dial prex by using manual dial.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Dialing Prex , and turn it on.
5. Use the keypad to enter the prex, and then touch the Done button. You can use numbers, pauses, and
dialing symbols.
92 Chapter 8 Fax ENWW