Manualshelf

HP PageWide MFP P77740-60 series - User Guide

ManualsBrandsHP ManualsDesktopsHP PageWide Managed P77740dw Multifunction Printer
101102103104105106107108109110
Set tone-dialing or pulse-dialing
Use this procedure to set the product to tone-dialing or pulse-dialing mode. The factory-set default is Tone.
Do not change this setting unless you know that the telephone line cannot use tone dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Dial Type, and then touch Tone or Pulse.
Set autoredial and the time between redials
If the product was unable to send a fax because the receiving fax machine did not answer or was busy, the
product attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-
error options.
●
To set the redial-on-busy option
●
To set the redial-on-no-answer option
●
To set the redial-on-connection-problem option
To set the redial-on-busy option
If this option is on, the product redials automatically if it receives a busy signal. The factory-set default for the
redial-on-busy option is On .
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Auto Redial, and then touch Busy Redial and turn it on.
To set the redial-on-no-answer option
If this option is on, the product redials automatically if the receiving machine does not answer. The factory-
set default for the redial-on-no-answer option is O.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Auto Redial, and then touch No Answer Redial and turn it on.
ENWW Set fax settings 93