HP PageWide MFP P77740-60 series - User Guide

If you subscribe to a ring-pattern service with a telephone company, you must set the product to answer the
correct ring pattern. Not all countries/regions support unique ring patterns. Contact the telephone company
to determine if this service is available in your country/region.
NOTE: If you do not have ring-pattern service and you change the ring-pattern settings to something other
than the default (All Standard Rings), the product might not be able to receive faxes.
The settings are as follows:
●
Ring Pattern Detection: Turn o or on the product's ring pattern detection capability.
●
All Standard Rings: The product answers any calls that come through the telephone line.
●
Single: The product answers any calls that produce a single-ring pattern.
●
Double: The product answers any calls that produce a double-ring pattern.
●
Triple: The product answers any calls that produce a triple-ring pattern.
●
Double and Triple: The product answers any calls that produce a double-ring or triple-ring pattern.
To set distinctive ring
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Distinctive Ring, touch Yes, and then touch the name of the option.
Use autoreduction for incoming faxes
The factory-set default for incoming fax autoreduction is On .
If you have the Stamping option turned on, you might also want to turn on Autoreduction. This reduces the
size of the incoming faxes slightly, and prevents the page-stamp from forcing a fax onto two pages.
NOTE: Make sure that the default paper size setting matches the size of the paper in the tray.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Automatic Reduction, and turn it on.
Set the fax sounds volume
Control the volume of the fax sounds from the control panel.
Set stamp-received faxes
The product prints the sender identication information at the top of each received fax. You can also stamp
the incoming fax with your own header information to conrm the date and time that the fax was received.
The factory-set default for stamp-received faxes is O.
ENWW Set fax settings 97