HP PageWide MFP P77740-60 series - User Guide

NOTE:
●
This option applies only to received faxes that the product prints.
●
Turning on the stamp-received setting might increase the page size and cause the product to print a
second page.
1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
2. On the control panel dashboard, touch (Setup).
3. Touch Fax Setup, and then touch Preferences.
4. Touch Stamping, and turn it on or o.
Send a fax
●
Send a fax from the control panel
●
Use phone-book entries
●
Send a standard fax from the computer
●
Send a fax from the software
●
Send a fax using monitor dialing
●
Send a fax using printer memory
Send a fax from the control panel
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the document feeder.
2. On the control panel, touch the Fax icon.
3. Do one of the following:
●
To send the fax now, touch the Send Now icon, and follow the onscreen instructions.
●
To send the fax later, touch the Send Later icon, follow the onscreen instructions, and set the fax
time.
4. Use the keypad to enter the fax number.
5. For a color fax, touch Settings, and then Color/Black and Send Fax as Color.
6. Touch Send.
Use phone-book entries
For more information about phone-book entries, see Use the phone book.
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the document feeder.
2. On the control panel, touch the Fax icon.
3. Do one of the following:
98 Chapter 8 Fax ENWW