HP PageWide MFP P77740-60 series - User Guide
Warning icons
CAUTION: Keep body parts away from moving parts.
CAUTION: Sharp edge in close proximity.
Power consumption and electrical specications
See the printer support website at HP Customer Support for current information.
NOTE: Power requirements are based on the country/region where the product is sold. Do not convert
operating voltages. This will damage the product and any such damage is not covered under the HP limited
warranty and service agreements.
Acoustic emission specications
Operation LwAd-mono (B) LwAd-color (B) Notes
Print 6.9 6.8
Copy 7.1 6.9 Document feeder models
Scan 6.9 6.7 Document feeder models
Environmental specications
Operating Transporting
Temperature 15° to 30° C
(59° to 86° F)
–40° to 60° C
(–40° to 140° F)
Relative humidity 20 to 80% 90% or less (non-condensing)
Altitude 0 to 3048 m (0 to 10,000 ft)
Tilt IMPORTANT: Use caution when moving the product after
cartridges have been installed. The product is designed to
operate within a levelness of ±3 degrees.
Electrostatic discharge
(ESD)
If an electrostatic discharge occurs when using the
product to copy, a line can appear on the copied page. The
ESD should clear if you copy the page again.
NOTICE: Values are subject to change. For the latest information, contact the printer administrator or
technical support.
ENWW Product specications 185