HP PageWide MFP P77740-60 series - User Guide

To connect the product to a network
The product supports connection to either a wired or a wireless network.
Supported network protocols
The product supports the following network protocols:
●
AirPrint 1.6 x
●
AirPrint Scan
●
ARP Ping
●
Bonjour
●
Bootp
●
CIFS client
●
DHCP, AutoIP
●
DHCP v6
●
HTTP, HTTPS
●
IPP
●
IPv4
●
IPv6
●
Legacy Default IP
●
LLMNR
●
LPD
●
Microsoft Web Services (Print, Scan, Discovery)
●
Netbios
●
Port 9100 Printing
●
SLP
●
SMTP client for alerts
●
SNMP V1, V2, V3
●
Syslog
●
TLS 1.0, 1.1, 1.2
●
WINS
●
WPA Enterprise
Connect the product using a wired network
Use this procedure to install the product on a wired network:
1. Connect the Ethernet cable to the Ethernet port (1) and to the network.
2. Turn the product on.
3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns
an IP address or host name for the product.
4. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or
touch the strip at the top of the home screen).
5. On the control panel dashboard, touch (Ethernet) to display the IP address. Touch Print Details to
print a page with the IP address.
16 Chapter 2 Connect the product ENWW