HP PageWide MFP P77740-60 series - User Guide

Media type Do Do not
●
Use fresh labels. Old labels are more likely to
delaminate during printing.
●
Use only labels that have no exposed backing
between them.
●
Use labels that lie at.
●
Use only full sheets of labels.
Letterhead or
preprinted forms
●
Use only paper that is approved for use in
HP PageWide products.
●
Do not use raised or metallic letterhead.
Heavy paper
●
Use only heavy paper that is approved for use in
HP PageWide products and meets the weight
specications for this product.
●
Do not use paper that is heavier than the
recommended media specication for this product
unless it is HP paper that has been approved for
use in this product.
Glossy or coated
paper
●
Use only glossy or coated paper that is approved
for use in HP PageWide products.
●
Do not use glossy or coated paper designed for
use in laser products.
NOTICE: Do not use any media that contains staples or paper clips.
Supported media sizes
Depending on model, the product may have a Tray 2 (single) or Trays 2 and 3 (tandem), in addition to Tray 1.
You can add one of the following lower trays as an optional accessory:
●
550-sheet tray
●
550-sheet tray and stand
●
3x550-sheet tray and stand
●
4000-sheet high-capacity input trays and stand
For each tray, use the appropriate paper and media sizes:
●
Supported paper and print media sizes
●
Supported envelope sizes (Tray 1 only)
●
Supported card sizes
●
Supported label sizes
●
Supported photo media sizes
Supported paper and print media sizes
Size Dimensions - mm (in) Tray 1
Trays 2 and
3 (tandem)
Tray 2
(single)
Lower 550-
sheet trays HCI trays
Automatic
two-sided
printing
Letter 216 x 279 (8.5 x 11)
Legal 216 x 356 (8.5 x 14)
Executive 184 x 267 (7.25 x 10.5)
34 Chapter 4 Paper and print media ENWW