HP PageWide MFP P77740-60 series - User Guide

For more information, see Supported media sizes and Supported paper types, tray capacities, and
orientations.
●
Make sure to adjust the paper guides to align with the media stack. The paper guides help the product to
identify the media size.
●
On the product control panel, verify that the media size and type match the media loaded in each tray.
To access the printer conguration screens, open the dashboard, touch (Tray Conguration/Setup),
and select the screen you need.
●
When you print, remember to select the correct tray settings in the printer software for the intended
print job.
Examples
This table describes the correct settings, for the printer software and printer conguration, of some common
print jobs.
I want to... Follow these steps The product then does this...
Set the product to
automatically select the
correct tray.
●
Do one of the following:
—
Windows: Under Paper Source, select
Printer Auto Select.
—
OS X: Under Paper Feed, select Auto
Select.
Then, select the correct media size and type
for the print job.
●
Printer conguration: Under Settings, on the
Paper Setup screen, the media size and type
for each tray must match what is actually
loaded in the tray.
Queries the trays and selects the rst one with the
correct media size and type, starting with the
default tray.
If Tray 1 contains media and its tray conguration is
set to Any Size and Any Type, the product prints to
this tray rst.
Print from Tray 1.
●
Do one of the following:
—
Windows: Under Paper Source, select
Printer Auto Select.
—
OS X: Under Paper Feed, select Auto
Select.
●
Printer conguration: Under Settings, on the
Paper Setup screen, for Tray 1 Paper Size must
be set to Any Size, and Paper Type must be set
to Any Type.
Prints from Tray 1 until the tray is empty. It then
queries the other trays and prints from the rst one
with the correct media size and type.
Send a job to the printer,
which waits until media
is loaded into Tray 1.
●
Printer software: Select Manual Feed.
●
Printer conguration: Under Settings, on the
Tray Management screen, Manually Feed
Prompt must be set to Always.
Displays a message, prompting you to load the
correct media into that tray. After you load the
media, the product prints only after you touch OK.
Print to a specic tray
only.
●
Printer software: Select the tray you want.
●
Printer conguration: Under Settings, on the
Tray Management screen, Use Requested Tray
must be set to Exclusive.
Prints the job to the selected tray if the media size
and type match.
If they do not match, the control panel displays a
message, prompting you to load media into that
tray that matches the media size and type selected
for the print job in the printer software.
After the correct media is loaded, the printer
automatically updates the tray conguration
ENWW Congure trays 39