HP PageWide MFP P77740-60 series - User Guide

NOTE: If you are not using Alternate Letterhead Mode (ALM), place the paper as follows for one-sided
printing:
A4/Letter sized: Place portrait-oriented paper with the side to be printed on face-down, with the top
edge toward the back of the tray.
A3/Ledger sized: Place landscape-oriented paper with the side to be printed on face-down, with the top
edge toward the left.
For ALM orientation, see Load letterhead or preprinted forms.
1. Pull the tray out of the product.
2. Open the paper length and width guides completely.
3. Place the paper in the tray and make sure that it is at at all four corners. Close the length and width
paper guides against the loaded media.
42 Chapter 4 Paper and print media ENWW